Submerged Pulse Valve Features and Benefits


Submerged Pulse Valve Features and Benefits

Submerged Pulse ValveMainly used in environmental protection dust removal equipment system, itIt is more suitable for the occasions where the air source pressure is wide, and it is a kind of pulse valve. The motor is used as the power to open and close the valve, which is used for relatively large valves, and the advanced electric valve can be used for flow control in the process.

Submerged Pulse Valve Features and Benefits


The electric valve has the advantages of easy assembly, low failure rate and meets the automation needs of the industry, and is a more cost-effective choice for the industry. Because the general traditional pneumatic valve is used, it is inevitable to have piping, solenoid valves and compressors to match, and the electric valve is driven by a motor, which is easy to install and saves trouble. the costing payment. In addition, the motor-driven method opens and closes smoothly, without the disadvantage of excessive instantaneous impulse, and the failure rate can be greatly reduced. Many people think that the electric valve is expensive and the use cost is high, but this is not the case. If calculated as a whole, the traditional valve needs to be increased For the installation of many accessories and pipelines, the price is not dominant, but it has to bear more maintenance costs. Therefore, the prospect of electric valves is relatively broad.

Reliability of Submerged Pulse Valves: Unreliability will damage the entire system!
1. Working life, this item is not included in the factory test item, but belongs to the type test item. In order to ensure the quality, brand-name products from regular manufacturers should be selected.
2. Work system: There are three types of long-term work system, repeated short-time work system and short-time work system. The company’s conventional products are long-term working system, that is, the coil is allowed to work with electricity for a long time. For the case where the valve is opened for a long time and only closed for a short time, a normally open solenoid valve should be used. When used in short-time working system and large batches, special orders can be made to reduce power consumption.
3. Operating frequency: When the operating frequency is required to be high, the structure should preferably be a direct-acting solenoid valve, and the power supply should be preferably AC.
4. Action reliability
Strictly speaking, this test has not been officially included in the professional standard of submerged pulse valve in my country. In order to ensure the quality, the famous brand products of regular manufacturers should be selected. In some occasions, the number of actions is not many, but the reliability requirements are very high, such as fire protection, emergency protection, etc., must not be taken lightly. It is especially important to take two consecutive double insurances.
The above are the characteristics and advantages of the submerged pulse valve shared with you today. Get it now~

Share:

Send Us A Message

More Posts

Selection of back pressure valve

Selection of back pressure valve We have many basic technologies that we need when selecting valves, so we need to pay attention to the following

LUCKY6S is Chinese leading manufacturer and supplier of industrial valves. which has over ten years of experience in manufacturing high-quality industrial valves, focuses on delivering safety, efficiency, and cost-effectiveness to every industry that requires automation. We are committed to supplying premium industrial valves and equipment to distributors, importers, and project managers worldwide. 

Top Valve Manufacturer

Newsletter

© 2018 All rights lucky6s

lucky6s
Logo
Enable registration in settings - general
Shopping cart