Selection of back pressure valve


Selection of back pressure valve

We have many basic technologies that we need when selecting valves, so we need to pay attention to the following four points when selecting back pressure valves:
Selection of back pressure valve

1. There are 12 types of pipeline diameters: DN6, 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, and 100.

2. There are two series of inlet pressure, 0.3MPa and 1.0MPa, and the pressure difference between the inlet and outlet can be adjusted by adjusting the length of the spring.

3. The materials are PVC (P), SS304/316 stainless steel (S), carbon steel (A)

4. The inlet and outlet connection methods provide three options: internal thread, flange and hose joint.
The above four points are the things we need to pay attention to when selecting the back pressure valve. After reading the above content carefully, I believe it will bring you great help when selecting the back pressure valve.

Share:

Send Us A Message

More Posts

Pressure specification of safety valve

Pressure specification of safety valve 1. Settingsafety valvepressure Inlet static pressure at which the safety valve disc begins to lift under operating conditions. Under this

LUCKY6S is Chinese leading manufacturer and supplier of industrial valves. which has over ten years of experience in manufacturing high-quality industrial valves, focuses on delivering safety, efficiency, and cost-effectiveness to every industry that requires automation. We are committed to supplying premium industrial valves and equipment to distributors, importers, and project managers worldwide. 

Top Valve Manufacturer

Newsletter

© 2018 All rights lucky6s

lucky6s
Logo
Enable registration in settings - general
Shopping cart