Non Slam Check Valve

The non slam check valve refers to the automatic opening and closing valve disc that rely on the flow of the medium itself, which is used to lower the noise when open or close, also known as nozzle check valve. The non slam check valve belongs to an automatic valve. Its main functions are to prevent back flow of the medium, prevent the pump and drive motor from reversing, and release the medium of the container. The non slam check valve can also be used to supply lines in which replenish the auxiliary system where the pressure may rise above the system pressure.

The purpose of the non slam check valve is to prevent the flow in the opposite direction, allowing only the media to flow in one direction. Usually this valve is automatic, The valve disc opens under the pressure of the fluid flowing in one direction; when the fluid flow in the opposite direction, due to the fluid pressure and the self-coincidence of the valve disc, the valve disc acts on the valve seat, thereby cutting off the flow. It is not suitable for media containing solid particles and high viscosity.


Send Us A Message

More Posts

Intelligent control valve

Intelligent control valve The intelligent control valve is a valve capable of realizing intelligent control functions. It is one of the control valves. It hasMicroprocessor

Switching valve introduction

The switching valve (forced valve) is a pneumatic switching valve installed at the hot end of the switching heat exchanger (or cold storage). The switch

LUCKY6S is Chinese leading manufacturer and supplier of industrial valves. which has over ten years of experience in manufacturing high-quality industrial valves, focuses on delivering safety, efficiency, and cost-effectiveness to every industry that requires automation. We are committed to supplying premium industrial valves and equipment to distributors, importers, and project managers worldwide. 

Top Valve Manufacturer


© 2018 All rights lucky6s

Enable registration in settings - general
Shopping cart