Four major classifications and complete structural characteristics of Y-type filters


There are four types of Y-type filters. The Y-type filter is an indispensable filter device for the pipeline system that conveys the medium. The Y-type filter is usually installed at the inlet of a pressure reducing valve, a pressure relief valve, a fixed water level valve or other equipment. end

1. The air filter cleans the polluted air to the state required for production and life, that is, to make the air reach a certain degree of cleanliness.

2. The liquid filter can clean the contaminated liquid to the state required for production and life, that is, to make the liquid reach a certain degree of cleanliness.

3. The network filter is set to block spam information, so that the information on the computer screen can meet the requirements as much as possible.The principle of same absorption separates light of different colors

4. Light filter, absorb some unwanted light. The above should be a mesh filter. In fact, there are many kinds of filters, such as laminated filters, sand filters, carbon filters, etc. The main principle is to use the pore size of the filter medium to intercept substances smaller than the pore size of the medium. Of course, Some filter media also have special effects such as adsorption. Most of the filters are not so troublesome to backwash, as long as clean water is introduced from one end of the filtered water to the medium in the backwash filter, a good backwashing effect can be achieved. This type of valve should generally be installed horizontally in the pipeline.

Share:

Send Us A Message

More Posts

discharge valve

discharge valve Corrosion resistance: 1. Use medium such as water, acetone, alcohol, ammonia, barium carbonate, benzene (the temperature of wcb material is -29℃-425℃). 2. Use

Hard sealing butterfly valve

The hard-sealed butterfly valve is also called the flap valve. The hard sealing butterfly valve mainly plays the role of cutting off and throttling on

LUCKY6S is Chinese leading manufacturer and supplier of industrial valves. which has over ten years of experience in manufacturing high-quality industrial valves, focuses on delivering safety, efficiency, and cost-effectiveness to every industry that requires automation. We are committed to supplying premium industrial valves and equipment to distributors, importers, and project managers worldwide. 

Top Valve Manufacturer

Newsletter

© 2018 All rights lucky6s

lucky6s
Logo
Enable registration in settings - general
Shopping cart